POWER SUPPLY PROJECT Archive

Different types of power supply projects developed for laboratory and experimental electronics applications. These projects, ranging from low-voltage symmetrical power supplies to high-current-capacity laboratory supplies and special power supplies that..

Following the older 0-30V 0-5A regulated power supplies, many XXX3005 model power supplies began to show a decline in quality. Through reverse engineering, the schematic of the LWDQGS APR-3005 power..

I don’t usually share power supplies that aren’t used in practice, but this project design is interesting, with a good power and voltage range. It’s a regulated power supply that..

Regulated power supply can be adjusted between 0.20 Volt 8 Ampere or 0.40 Volt 4 Ampere according to the selection. Current limiting between 0V and 20V 2mA..8A. High output voltage,..

I gave the device in the Breadboard Box project that I shared before to my friend as a gift. He loves electronics (especially analog electronics) and since he makes lots..

Voltage adjustment from 0.1V to 25V with “+” and “-” buttons; When the “+” and “-” buttons are held down, a slow change begins at 0.1V, after 2 seconds the..

I made an application about converting the old generation ATX power supply to a 0.24v 0.8.5A regulated power supply, as in the project of converting the computer power supply to..

The circuit consists of the following units: a rectifier with a filter, a +12V voltage stabilizer, voltage stabilization, current stabilization, indication, a control unit and overheating protection. If the output..

Actually, I implemented the power supply circuit with limited possibilities, but it is sufficient for me, the first tests were done successfully. Since I have a toroidal transformer with an..

A simple 0-30V 0-3A regulated power supply circuit based on the NE5532 opamp IC that you can use in your electronics workshop. Basic parameters of the power supply: Input voltage..