In this article, and a student friend, talk about his work with a bottle filling machine from the block schema system easier.

Block diagram of bottle filling machine;

1: Tape engine starts to spin. “GETTING a NEW BOTTLE” author

2: Sensor detects when the motor stops the bottle. The screen is GETTING READY to BE FILLED. ” For half a second.

3: Motor water bottle. Author of “DOLOYOR” on the screen. The other sensor detects the water level enough. The Motor stops on the “FILLING”. Filling the counter increases by 1.

4: wait for 2 seconds, then starts all over again the bottle Filled. “GETTING a NEW BOTTLE,” writes the engine works

One of the cylinder you can see one of the mechanics had fixed. Swivel part geared to a slow and powerful want to strap the engine rotating gear with fasten.

Mechanical tape any appropriate box or wooden seat, or even your own to make a system that can be mounted on the engine box.

These cylinders have a plastic coated fabrics such as, canvas or banner cloth, such as a fence with miller turns this tape to ensure the progress of.

This tape instead of a full Middle elevation, close to the size of the bottle, of course. put water into the box in the store car wiper pump hose, and put that bottle when the bottle water if motor pompalanabilsin.

I want to share with you the details of this mechanism in the future than in the pictures and I couldn’t find my archive at the moment.

Circuit PIC16F877 microcontroller based on the software used for the display 2×16 LCD display isis proteus simulation Picbasic source code prepared by the PCB drawings there.

FILE DOWNLOAD LINK LIST (in TXT format): LINKS-22696.zip