Tag: microchip projects

PIC circuits, PIC projects have been realized with microchip controllers of Microchip company.

PIC12F629 Water Level Control Circuit Proton Basic

| 2009/04/20

This circuit controls the water level of water tanks or wells. Three level probes are used in the tank to measure the water level. These are conductive rods with a plastic sheath. Probe A determines the top level of water. The B probe determines the level at which the water will be the lowest. The…

PIC16F876 Midi splitter Circuit with LCD display

| 2009/04/11

Circuit pic 16f876 microcontroller and SN74LS00 nand gate integrated midi input with CNY17 opto coupler, it can reproduce the isolated isolated single midi signal as 2 outputs. Selected channel information can be seen on the 2×16 LCD screen. could be an example. Since we chose a flexible PIC running at 4 MHz, the resulting circuit…

PIC18F452 CCS C RF Humidity Temperature Circuit (addition to calendar, clock)

| 2009/04/09

Feature a very high level transmitter and receiver circuit consists of two parts of a project are provided with the main control PIC18F452 PIC16F84 sensors are connected to the transmitter circuit based on the information received from sensors on the lcd screen is displayed as text and graphical MPX4115 pressure sensor TC77 SPI temperature sensor…

Color Sense Circuit LCD PIC16F877 Picbasic Pro

| 2009/04/07

This circuit using a PIC 16F877 microcontroller LCD (Liquid Crystal Display) has been applied on the color sensor. For circuit design and printed circuit board operations and Proteus ISIS Proteus ARES program is used. The operating logic circuits in a closed environment in order of ARD flashing light emitted from the LEDs is based on…

LCD Stopwatch Countdown Counter Circuit with PIC16F877 Picbasic Pro

| 2009/04/07

This circuit using a PIC 16F877 microcontroller LCD (Liquid Crystal Display) application was made on the stopwatch and countdown. Counting the TMR0 interrupt for the microcontroller is used. For circuit design and printed circuit board operations and Proteus ISIS Proteus ARES program is used. Flow diagram of the circuit is as follows. Countdown Counter Circuit…

Feedback PWM Motor Control Circuit with PIC16F628 L298

| 2009/04/04

Circuit L298 (bridge-mounted motor drive) and PIC16F628 microcontroller based on the stop, sudden stop, start, improve, finish, forward, rewind controls have brake position the motor generator to the state in case of falling energy battery again sending software in assembly language prepared. Asm. hex and isis proteus. DSN files available Feedback motor drive circuit diagram…

PIC16F84 00-99 Forward, Backward Counter Circuit Picbasic Pro

| 2009/03/28

There are two pieces of counter circuit applications and other Picbasic Pro source code files available in proteus isis 00-99 7447 advanced counter display assembly PIC16F84 display (automatic) PIC16F84 Counter Circuit Schematics PIC16F84 00-99 Counter Circuit schematic Picbasic Pro source code files:

Hexadecimal, Binary Counter Circuits LED Display PIC16F84

| 2009/03/28

Hexadecimal and binary counter display LED display applications have been realized with all circuits PIC16F84A isis simulation code and other files are MPLAB Hex-button controlled adesimal Counter 1-2-3-4-5-6-7-8-9-cross count ABCDEF. Dip switches controlled display hexadecimal display counter circuit based on the combination of numbers will appear on off, Automatic 7-segment display hexadecimal display counter applications,…

5-Storey Button-Controlled Elevator Project with Pic16f84a

| 2009/03/18

Detailed and complete project software assembly prepared by the lift circuit PIC16F84A based on the control card of buttons on the floor with the choice being made door integrated with the built motor drive circuit control ediliry card LEDs on the observations can be made. Circuit model for testing the operation of the elevator you…

Antenna control ccs c with 16f877 button with LCD display

| 2009/03/14

A project made upon request by FxDev, which prepares CCS-C Codes, provides 2 buttons for direction control, the third button up and down, and the output to be 1 (+5v) when the desired output number appears on the LCD screen. You can add a transistor relay according to the element you will control by making…