PIC16C622 Microcontroller Measuring the Resistance Capacitor RC Meter Circuit

| August 30, 2023 Updated
PIC16C622 Microcontroller Measuring the Resistance Capacitor RC Meter Circuit

Based on PIC16C622 microcontroller circuit between 1Ω 999Ω resistance measurement between 1nF to 999 nF capacitor measurement yapılabiliry computer’s connection to the controller software pc software with assembly prepared with Visual Basic. PIC16C622 and application circuit microchip application notes all the details about the original formula is given.

Resistance, Capacitor Meter Circuit Schematic

pic16c622-direnc-kapasite-metre-150x150

The application circuit, called PICMETER, uses a PIC16C622 as a resistance and capacitance meter. The PICMETER uses a variation of the single-slope integrating converter. The linear slope and integrator of Figure 13 are replaced with the exponential charge waveform of an RC. The charge time of a known component is compared against the charge time of an unknown component to determine the value of the unknown component.

A schematic of the PICMETER is shown in Figure 16. All reference designators cited in this section refer to this schematic. Results are transmitted to a PC which displays the value measured.

PIC RC meter Circuit files:

PIC16C622 Microcontroller Measuring the Resistance Capacitor RC Meter Circuit

Password: 320volt.com

Published: 2010/02/16 Tags: ,



1 Comment “PIC16C622 Microcontroller Measuring the Resistance Capacitor RC Meter Circuit

  1. Electronics CircuitsElectronics Circuits

    Micro Robotic Fly screen cleaner AT90LS8535 Robot BUG

    A very interesting robot project ratchet içintasarl been cleaning the flapper cleaner robot brain of the system microcontroller atmel at90ls8535 source software given c.

    Uygulayamasa sections of the circuit on the robot project source software can be useful, especially H-bridge motor driver section hyperlinked’s MOSFET driver stage

    Screen Cleaner Robot Project

    REPLY

Leave a Reply

Your email address will not be published. Required fields are marked *