In this application, each button is pressed, the LEDs are made with a different process. If you notice here that controls the release of the button at the end of the while statement is the if statement. When the button is pressed so that the LEDs corresponding changes are made in the process after the…
Pressing the first button in this application increased the number of digits shown in the display, the second reduced the number of digits after pressing the button, the last button is pressed, the display will be shown only 0. To make this process display () function to display the maximum number to be scanned in…
Very nice Hi tech C examples we are here . In this application a variable defined as longer displayed on the screen that will examine how the number . tmp sequence numbers assigned to the same are shown on the display . The first button is pressed, the value of one variable increases, the second…
A button to connect to each pin of the microcontroller is not economical. If you are in the hundreds of computer keyboard and examined the inside of the foot, which was not integrated. Buttons with a vertical and horizontal connecting a column and row are generated. Thus, the total number of columns and rows as…
This practice differs from the previous one which button was pressed, the display shows its value and each key is bsaıl remove the buzzer beeps. Speak () function by creating a square wave with a given buzzer beeps when the square wave is formed. Changing the frequency of the square wave can be created in…
In this application, which if the link is relevant, as long as the button is pressed, the led light and the while loop stops work due to codes. For this reason, the a button while holding down other buttons simply has no meaning. In addition, LEDs and buttons for the connects the LEDs of the…
This application has been checked with the relay 220v lamp. The lamp illuminates when the button is first pressed, pressed and released again when the lamp is turned off. microcontroller output current is not enough to drive relays directly. For this, the output current of a transistor is increased. EMK opposite will occur in the…
The first Hi Tech C example is an example of the classic Hello world in C. Of course, this example is adapted to the world of the microcontroller. A 5V supply voltage for the operation of the PIC circuit, reset circuit, and oscillator source is required. For battery-powered applications, the lower the voltage levels generated…