//******************************************************************************
//   MSP430F54x Demo - 8x8 Signed Multiply
//
//   Description: Hardware multiplier is used to multiply two numbers.
//   The calculation is automatically initiated after the second operand is
//   loaded. Results are stored in RESLO, RESHI and SUMEXT = FFFF if result is
//   negative, SUMEXT = 0 otherwise.
//
//   ACLK = 32.768kHz, MCLK = SMCLK = default DCO
//
//               MSP430F5438
//             -----------------
//         /|\|                 |
//          | |                 |
//          --|RST              |
//            |                 |
//            |                 |
//
//   M Smertneck / W. Goh
//   Texas Instruments Inc.
//   September 2008
//   Built with CCE Version: 3.2.2 and IAR Embedded Workbench Version: 4.11B
//******************************************************************************

#include "msp430x54x.h"

void main(void)
{
  unsigned char value1,value2;

  WDTCTL = WDTPW+WDTHOLD;                   // Stop WDT

  value1 = 0x04;                            // Assign operands for signed mult
  value2 = 0x84;

  MPYS_B = value1;                          // Load MPYS to denote signed operation
  OP2_B = value2;                           // Load OP2 with byte access to avoid
                                            // the need for sign extension

  __bis_SR_register(LPM4_bits);             // Enter LPM4
  __no_operation();                         // For debugger
}