CNC router project consists of 3 chapters power solid – L6208 (DMOs bipolar stepper motor driver integrated) drive solid L297 (stepper motor control) L298 (bridge motor drive) and for computer..
The effect circuit is based on two TL072 op amps, the VR2 100k potentiometer is used to adjust the bass sound, the circuit is powered by a 9-volt battery, since..
The circuit is a simple circuit that can be an example in the field of medical electronics, medical electronics, based on the LM2904 op-amp integrated circuit. Heartbeat and pulse detection..
In this article, a system used in cars which will give information on the wiper control. I made the second one PWM circuit simulation engine will run the servo motor..
In this article I used in banks and hospitals will give information about the Q-matic s. I’ve done a routing circuit board (main board) and consists of three separate teller…
PIC PID Microcontroller A closed loop PID controller application for speed control of DC motors. The l298d driver integrated circuit was used for motor control. The PID control circuit is..
TDA1562Q integrated with the quality and output power will be longer as popular had previously shared different applications. In this application, a 70-watt subwoofer for bass amp circuit made. Bass..
This project used PIC24FJ64A004 and Bonus Part MCP6S26. mcp2030, mcp1700 The Cable Tracer is device to detect underground cables. It was designed and tested on un-energized electric power cables but..
The dsPIC30F2010-based Drop-In Woofer Servosystem linearizes loudspeaker cone movement via feedback from a pressure-sensing microphone. The manipulate roll feedback comes from a somesthesia device region the closed speaker papers DCON1bits.SSRC..
The Power Frequency Monitor (PFM) is a MicroChip dsPIC30F3012 micro controller based device used for high resolution measurement of AC power frequency. The Power Frequency Monitor communicates easily with a..
