Tag: interesting projects electronics

interesting projects electronics circuits interesting schematics

Motherboard PCI Hack SMD SOIC SOP Adapter

| 2011/06/13

Computers about a lot of helpful this elektronikd included in the PC power supply of parts a lot of the circuit is done coils, coolers, fans, etc. are used on the main board with materials will work for sure, as long as they need to get on whether considered Author circuits, SMD for use in…

Making practical probe for measuring instruments

| 2011/05/21

I’m doing the drill bit from the syringe needle in my hand I had a lot of plastic parts that have lost their function as foam probe tip my hand I have done in terms of evaluating syringes friends who use the same method can do. easy to make practical and useful. I’ve included it…

Handmade Drill bits Syringe Needle

| 2011/05/17

For a long time I have found a method that I use and own both practical and pretty cheap as well, for me, better than any other drill bit Show some advantage; 7 injector syringe needle with 50 kr note: injector syringe must be bought from the smallest. Very fast and can penetrate without overflowing…

Edding PEN Draw PCB Printed Circuit Board

| 2011/05/17

I used to print circuits directly plaque edinger with the stylus on the drawing would have made after the copy paper began using printed circuit copy of the Remove the paper plaque insert with pencil pushing copies passes over I print plaque after they were uttered edinger and goes through what I’ve been trying am…

Spot lamp illuminated magnifying glass project

| 2011/04/18

First, this project has no intention of making the places I’ve traveled quite a bit to buy a simple büyülteçl but the prices are too high for the lamp lens down from $ 100 I could not find anywhere. I was a student that I (student = $ 0 :)) just magnifying bought earlier that…

An Interesting Method for Printed Circuit Board Cardboard PCB

| 2010/01/12

Method practicality questionable, but now the most appropriate category “Practical Information” will be earlier in the PCB about the making of articles I’ve shared now the easiest and cheapest method iron is happening with the new I met a brother of mine ever never crossed my mind a method I have used 🙂 Profession has…

Change the Direction of DC Motors with Toggle Switch

| 2010/01/02

Occasionally I use a simple method, many people do not know recently an ab dc motor driver asked what would be used to ask when I left or right engine to change the direction said that a circuit is not necessary to’ve told you many our simple Although it seems inform have benefits. First, we…

Handmade Simple Motion Sensor Project

| 2009/11/17

Motion sensor 4 as men Header Connector can provide motion information based on the 2-position. With some effort you can make your own motion sensor on Head Sensor Connector hook type you will use to be in the middle of four remaining sections were passed with pliers or cutters others inward turn away a large…

Handmade SMD Microcontroller Programming Socket

| 2009/10/08

For programming I integrated SMD usually on the legs if I have thin wire soldered on the PCB with SMD edition of pegs with integrated pull cable programs of the ways I squeeze PCBs Handmade SMD Microcontroller Programming Adapter Cercleferronancy author on the site prepared for the hand-made integrated SMD shared socket socket to program…

Simple Test Method for PTC Thermistors

| 2009/02/09

High-power PTC thermistors PTC to test a simple practical method of this type generally used in tlevizyo and monitor control rarely fails for this reason they will not be forgotten in supply failure, keep in mind;) 220v ac supply given the PTC sturdy lamp gives light after an instant PTC heats the internal resistance increases…